3D projection equipment polarization element Ultrasonic cleaning machine Equipment introduction:


The optical components of the 3D display include polarization splitting prisms, mirrors and Windows, etc., which make the 3D system brighter and clearer.


High brightness and contrast, high reliability, independent wavelength and incidence Angle, a variety of sizes and shapes, wide wavelength range, low energy efficiency loss and other product advantages make components in the optical industry more widely used, for large quantities of optical components cleaning problems, Wegood manufacturers independently developed special cleaning equipment.


Vgt-1207fh 3D projection equipment polarization element Ultrasonic cleaning machine uses water-based detergent to clean the surface of polished optical elements, remove dirt, dust, organic particles, etc. For automatic precision optical ultrasonic cleaning machine, the equipment automatically completes the established cleaning process; With touch screen human-machine interactive interface, the cleaning process can be preset, convenient operation and good use experience.


Equipment workflow: When the machine is in the waiting state, the cleaning basket is put into the feed port manually, after starting the button, the manipulator automatically carries the cleaning basket to the cleaning tank, and each cleaning tank begins to clean according to the set process. After the process is completed, the handling manipulator transfers the cleaning basket to the next cleaning tank, completes the cleaning process in turn, and the cleaning basket is automatically transported to the discharge port. The waste water and waste liquid are discharged to the factory waste water and waste liquid pipeline through the designated pipeline.


The equipment has a total of 12 slots, modular design, easy to split and combine; Equipped with resistivity meter and flow meter to monitor water quality and flow at any time.


3D projection equipment polarization element Ultrasonic cleaning machine Equipment parameters:


(1) Cleaning beat: 20-600 seconds/slot, the specific beat depends on the production process;


(2) Cleaning tools: L240*W210*H200mm;


(3) Inner slot size: L380*W340*H315mm;


(4) Machine power: 44KW;


(5) Ultrasonic power: 8KW;


(6) Heating power: 32KW;


(7) Pump power: 3KW;


(8) Others: 0.5KW;


(9) The overall size of the equipment: about L7400*W1800*H2000mm, based on the actual production size;


(10) Equipment working sequence: in and out of the material direction is left in and right out.


3D projection equipment polarization element ultrasonic cleaning machine working requirements:


(1) Area size: about L8000*W1850*H2200mm;


(2) Water pressure: flow ≥35L/ min;


(3) Power requirements: main power supply 380VAC±10%, 50Hz;


(4) High purity water outlet resistivity: ≥ 16mω.cm;


(5) Air temperature: 5-35℃;


(6) Relative humidity: ≤85%;


(7) Compressed air: clean and dry 5KG;


(8) Cooling water: ≤5℃.


3D projection equipment polarization element Ultrasonic cleaning machine main mechanism description:


Material transfer mechanism：


1, both sides are equipped with stainless steel guide device, both ends are equipped with induction switch and PLC connection, automatic completion of material in and out.


2, set the photoelectric protection switch to ensure that the incoming and outgoing materials are safe and reliable.


3, using cylinder + guide rail transmission mechanism, stable and reliable operation.


4, the pallet structure, do drip protection.


Handling and conveying mechanism:


Shock absorption design: The mechanism adopts shock absorption design to ensure the smooth operation of the equipment and prevent the occurrence of risks.


Hook distance: hook stroke 50mm.


Transverse speed: maximum transverse speed 120mm/s (transverse speed can be adjusted).


Throwing lifting mechanism:


Form: The throwing mechanism is driven by the motor and driven by the screw, which drives the cleaning basket to move up and down in the cleaning tank. Precise positioning, good running stability, low noise, throwing frame is SUS304 stainless steel material.


Principle: The workpiece is evenly thrown up and down during the cleaning process, which can increase the friction between the surface of the component and the liquid, which is conducive to the surface dirt falling off quickly and improve the cleaning effect.


Throwing distance: The throwing distance shall not be less than 50mm.

Tossing frequency: 15 times/min (tossing speed and frequency can be adjusted).