China
English
PRODUCT
Pure_water_machine_series
>Gas_ultrasonic_cleaning_machin
>Optical ultrasonic cleaning ma
>Single_slot_ultrasonic_cleanin
>Double_tank_ultrasonic_cleanin
>Robot_ultrasonic_cleaning_mach
>High_pressure_spray_ultrasonic
>Through_the_type_of_spray_ultr
>Automatic_intelligent_ultrason
>Wave_box_rotating_high_pressur
>
Contact Us
189-2649-3933
address：E building,Hongyuan Area,HuaChang Rd.Dalan Street,Bao’an Area,Shenzhen
tel：+86-755-28035588
+86 18926493933
tax：+86-755-28035088
email：sz008@vip.163.com
Wave_box_rotating_high_pressure_spray_cleaning_machine_series
VGT-1027F series gearbox rotating high pressure spray cleaning machine
Product Detail
Overview:
The wave box cleaning machine is one of the series products developed and produced by our company. The water-based solvent is used as the wave box cleaning medium. The cleaning process is simple, fast and efficient. It is suitable for batch operation in the production workshop and is widely used to clean all kinds of motor vehicle parts. , wave box housing, and hardware industry.
Structure and composition:
The gearbox cleaning machine is mainly composed of a spray box, a liquid storage tank, an automatic temperature control heating system, a filtering system, a liquid refilling system, a fuselage frame, a control panel and a casing.
Cleaning process:
Packing → Rotating high pressure spray → Next step.
The basic principle of the wave box cleaning machine:
The city water and the cleaning liquid are used for heating, and after filtering, high-pressure spraying is performed by the high-pressure water pump, and a rotating work table is arranged in the box body, so that the workpiece is evenly cleaned, and the effect is good.
Before starting and preparing:
1. Check if the machine is installed, turn all the support feet down, and adjust the machine to the horizontal position;
2. Place all power switches and electrical switches in the "off" position to check if the power supply meets the requirements;
3. Check whether the connection between the water supply and the drain pipe is correct. The outlet pipe of the water separator is taken away from the washing machine, and all the drain ball valves are closed;
4. Inject the tank into the cleaning solution according to the cleaning process requirements;
Reservoir: Inject the cleaning solution, the liquid level is 50 mm from the top cover.
5, according to the cleaning process requirements to adjust the temperature to the required temperature, the temperature of each tank for reference: storage tank: 80-85 ° C.
Instructions:
1. Press the power button: Check whether the three-phase power indicator is fully lit, otherwise the phase loss fault should be eliminated.
2. Place the box heating switch in the "on" position and check if the corresponding indicator light is fully lit;
3. When the box reaches the set temperature, the corresponding indicator light is off and the gear box cleaning machine starts to work;
4. If the cleaning agent becomes dirty or does not meet the cleaning requirements, open the filter ball valve, clean it, remove the dirt, and clean it.
Precautions for use:
(Special attention to 1, 2, 3)
1. When there is no cleaning liquid in the liquid storage tank, it is absolutely impossible to start the work, otherwise it will lead to serious consequences of damage;
2. When there is no cleaning liquid in the tank or the cleaning liquid surface is not up to the requirement, it is absolutely forbidden to heat, otherwise the heating wire and the heating plate will be damaged;
3. Do not use flammable solvents as cleaning liquids;
4. Emergency stop should be based on the power stop button. Before the main power supply of the machine is disconnected under normal conditions, all the switches on the control panel should be placed in the “off” position to avoid damage to the heating components.
5. Regularly inspect and clean control appliances;
6. When there is too much sediment in each cleaning tank, it should be rinsed and removed in time;
7. When filling the cleaning solution, try to avoid pushing or moving the body.
maintenance:
1. Regularly clean dirt and other attachments to keep the body clean;
2, regularly clean the ground, so that the water around the machine is smooth, avoiding silted water;
3. Regularly check the grounding of the machine body. When the insulation value is too low, consideration should be given to avoid the adverse environmental factors and take drying measures.
4. This machine should be used by special personnel to prevent illegal operation of unfamiliar situations.
Simple faults and exclusions:
1. The total power supply of the machine cannot be started: check the insurance of the power supply and control lines and related circuit components;
2, heating failure: dry, temperature control setting is abnormal, check whether the heating pipe (line) in the box is burnt, the corresponding relay is damaged, the temperature control switch sensing line;
3. If there is any problem with the machine, notify the company to send personnel to repair.
Transportation and installation:
1, handling method:
When transporting, it should be flat and flat, and the inclination should not exceed 30 degrees, and it cannot hit the machine;
2, installation location:
The machine should be installed in a ventilated and dry place, the ambient humidity should not be higher than 30 degrees, the body casters should be placed smoothly, and the distance from the wall should be more than 0.8m, so that the ventilation and heat dissipation are good and easy to maintain;
3, power supply:
The voltage of the power supply and the maximum allowable current should meet the requirements;
4, to ensure grounding:
The machine must be reliably connected to the ground. The zero connection must ensure that the zero trunk is reliably connected to the equipment.
The wave box cleaning machine is one of the series products developed and produced by our company. The water-based solvent is used as the wave box cleaning medium. The cleaning process is simple, fast and efficient. It is suitable for batch operation in the production workshop and is widely used to clean all kinds of motor vehicle parts. , wave box housing, and hardware industry.
Structure and composition:
The gearbox cleaning machine is mainly composed of a spray box, a liquid storage tank, an automatic temperature control heating system, a filtering system, a liquid refilling system, a fuselage frame, a control panel and a casing.
Cleaning process:
Packing → Rotating high pressure spray → Next step.
The basic principle of the wave box cleaning machine:
The city water and the cleaning liquid are used for heating, and after filtering, high-pressure spraying is performed by the high-pressure water pump, and a rotating work table is arranged in the box body, so that the workpiece is evenly cleaned, and the effect is good.
Before starting and preparing:
1. Check if the machine is installed, turn all the support feet down, and adjust the machine to the horizontal position;
2. Place all power switches and electrical switches in the "off" position to check if the power supply meets the requirements;
3. Check whether the connection between the water supply and the drain pipe is correct. The outlet pipe of the water separator is taken away from the washing machine, and all the drain ball valves are closed;
4. Inject the tank into the cleaning solution according to the cleaning process requirements;
Reservoir: Inject the cleaning solution, the liquid level is 50 mm from the top cover.
5, according to the cleaning process requirements to adjust the temperature to the required temperature, the temperature of each tank for reference: storage tank: 80-85 ° C.
Instructions:
1. Press the power button: Check whether the three-phase power indicator is fully lit, otherwise the phase loss fault should be eliminated.
2. Place the box heating switch in the "on" position and check if the corresponding indicator light is fully lit;
3. When the box reaches the set temperature, the corresponding indicator light is off and the gear box cleaning machine starts to work;
4. If the cleaning agent becomes dirty or does not meet the cleaning requirements, open the filter ball valve, clean it, remove the dirt, and clean it.
Precautions for use:
(Special attention to 1, 2, 3)
1. When there is no cleaning liquid in the liquid storage tank, it is absolutely impossible to start the work, otherwise it will lead to serious consequences of damage;
2. When there is no cleaning liquid in the tank or the cleaning liquid surface is not up to the requirement, it is absolutely forbidden to heat, otherwise the heating wire and the heating plate will be damaged;
3. Do not use flammable solvents as cleaning liquids;
4. Emergency stop should be based on the power stop button. Before the main power supply of the machine is disconnected under normal conditions, all the switches on the control panel should be placed in the “off” position to avoid damage to the heating components.
5. Regularly inspect and clean control appliances;
6. When there is too much sediment in each cleaning tank, it should be rinsed and removed in time;
7. When filling the cleaning solution, try to avoid pushing or moving the body.
maintenance:
1. Regularly clean dirt and other attachments to keep the body clean;
2, regularly clean the ground, so that the water around the machine is smooth, avoiding silted water;
3. Regularly check the grounding of the machine body. When the insulation value is too low, consideration should be given to avoid the adverse environmental factors and take drying measures.
4. This machine should be used by special personnel to prevent illegal operation of unfamiliar situations.
Simple faults and exclusions:
1. The total power supply of the machine cannot be started: check the insurance of the power supply and control lines and related circuit components;
2, heating failure: dry, temperature control setting is abnormal, check whether the heating pipe (line) in the box is burnt, the corresponding relay is damaged, the temperature control switch sensing line;
3. If there is any problem with the machine, notify the company to send personnel to repair.
Transportation and installation:
1, handling method:
When transporting, it should be flat and flat, and the inclination should not exceed 30 degrees, and it cannot hit the machine;
2, installation location:
The machine should be installed in a ventilated and dry place, the ambient humidity should not be higher than 30 degrees, the body casters should be placed smoothly, and the distance from the wall should be more than 0.8m, so that the ventilation and heat dissipation are good and easy to maintain;
3, power supply:
The voltage of the power supply and the maximum allowable current should meet the requirements;
4, to ensure grounding:
The machine must be reliably connected to the ground. The zero connection must ensure that the zero trunk is reliably connected to the equipment.